Ensuring the longevity of your tubular inverter battery is essential for an uninterrupted power supply. When it comes to reliable energy solutions, tubular batteries stand out in performance. However, a lack of proper maintenance can impose severe damage.
So what’s the solution?
In this blog, we have presented the best tips for maintaining a tubular inverter battery to ensure longevity and safely handle your power-backup system.
Understanding Inverter Battery Lifespan
An inverter battery’s lifespan is the average period a battery can store and supply power backup before its performance gradually declines. Tubular Batteries typically last 4 to 5 years, and with proper maintenance, they can last 7 years as well.
Before maintaining your tubular battery or trying to enhance its lifespan, know what can impact its longevity in the first place.
Which Factors Can Reduce the Lifespan of Inverter Batteries?
Certain factors can reduce the lifespan of your tubular inverter battery. The following factors can affect your battery’s lifespan:
1.Temperature
A battery’s exposure to extreme heat or cold can accelerate wear and tear on its cells. If your battery is installed in a place where direct sunlight falls on it, its lifespan can be significantly reduced.
Similarly, if your tubular battery is stored in a cold, damp place, rust can deposit on the terminals due to humidity. This can also reduce the battery’s lifespan. Moreover, a complete lack or minimal air supply inside the battery storage might also cause harm due to excessive heat imposed on the battery.
2.Charging Issues
Overcharging and undercharging of tubular batteries can reduce the lifespan of the machines. Excessive charging can erode the plates and damage functionality. Low charge levels can strain the battery’s internal components, reducing efficiency and gradually affecting overall performance.
3.Usage Patterns
Overloading your battery without knowing its actual capacity can damage your battery’s performance. Frequent deep discharges can also impose pressure on the battery plates and gradually lower performance.
4.Quality of the Battery
A high-quality tubular battery will always outlast a low-grade alternative. Choosing a battery without a proper warranty, clear guarantee, or authentic certification can lead to performance issues and costly maintenance or repair challenges later.
Want to Buy Tubular Inverter Battery for Your Home and Office?
How to Maintain Tubular Battery for Longevity?
Battery Maintenance is not tough, but knowing about the basics can help tubular battery users. Here’s how you can maintain a tubular battery:
1.Install in a Well-Ventilated Area
Install your tubular battery in a well-ventilated area to dissipate heat and prevent overheating. If proper airflow is managed, water levels may evaporate less, reducing the need for frequent refills.
2.Regularly Check Water Levels
Water levels in a tubular battery fall. Inspecting the water levels every 2 months can help with proper distilled water top-up. For convenient maintenance, we have designed an Electrolyte Level Indicator that indicates the electrolyte level in each cell.
Additional fluidic headspace above the battery plates increases wear intervals and reduces the need for frequent topping up.
3.Clean Battery Terminals and Surface
Rust deposition on battery terminals can increase corrosion and hinder performance. Periodically wipe the battery terminals with a baking-soda-and-water solution to remove corrosion buildup. After cleaning, apply a thin layer of petroleum jelly to help protect the terminals from future rust and oxidation.
4.Avoid Overcharging and Undercharging
Overcharging can lead to corrosion of the battery plates. Undercharging can also put pressure on the battery plates and reduce overall functional power. Maintain a medium charge and ensure that the charger is properly connected to the battery terminals. Use a compatible charger with an auto-shutoff feature to prevent overcharging.
5.Monthly Run Battery
If you experience frequent power cuts, discharge your tubular battery at least once a month. This can prevent deep discharge and maintain the battery’s capacity.
Safety Tips for Handling Tubular Inverter Battery
Proper battery maintenance also requires the user’s safety. Here are some safety tips for handling a tubular inverter battery:
- Wear protective gloves and goggles when handling batteries
- Ensure that the storage area is clean and dry to avoid any short circuits or damage.
- Never touch battery acid directly. In case of spills, clean immediately with baking soda solution.
- Keep Away from Flames and Sparks, as batteries release hydrogen gas, which is highly flammable.
- Maintain proper distilled water levels (for lead-acid tubular batteries) to prevent internal damage.
- Use the Correct Charger and Inverter and ensure compatibility to avoid overcharging or undercharging.
- Tighten terminals properly as loose connections can cause sparks, overheating, and reduced efficiency.
- Keep battery upright always as tilting may cause acid leakage and internal damage.
- Follow Manufacturer Guidelines and allways adhere to installation and maintenance instructions for safe operation.
Conclusion
Maintaining the quality and longevity of an inverter battery is not easy, but with the tips above, you can quickly secure battery’s lifespan. We at Star Plus Battery ensure that our inverter batteries can sustain multiple energy cycles without compromising longevity.
As a user, you need safe storage to prevent moisture, dust accumulation, and fire outbreaks. We hope this article helps you with proper inverter battery maintenance. Connect with us today for appropriate guidance on installation and managing battery performance.
0 Comments