In countries like Nigeria, where the power grid is unreliable, the switch to alternative modes of power is standard. Inverter and inverter batteries are among such alternative modes of power that have become very popular in recent years due to their reliability and stability. However, in countries like Nigeria, where power demands are high and the supply is low, you need a robust inverter battery system to help you power your heavy-duty appliances without hiccups. A 12V 220Ah tubular battery comes as a saviour in such cases. It’s capable of supplying high power to assist you in running your appliances during power outages.
But we are often flooded with questions about this heavy-duty battery and its charging. So, here we aim to answer all these questions one by one.
What is the Charging Current and Maximum Charging Current in Tubular Batteries?
Tubular batteries are a type of deep-cycle lead-acid battery commonly used in applications such as inverters, solar power systems, and electric vehicles.
The charging current refers to the amount of electrical current supplied to the battery during the charging process. It is typically measured in amperes (A).
The maximum charging current for tubular batteries can vary. It particularly depends on the battery model and manufacturer. However, as a rule of thumb, tubular batteries can be charged at a current rate between 10% and 20% of their rated capacity. For example, if you have a tubular battery with a rated capacity of 100 Ah (ampere-hours), the maximum charging current would range between 10 A and 20 A.
It’s important to note that exceeding the recommended charging current can lead to overheating and damage to the battery. Therefore, it’s crucial to follow the manufacturer’s guidelines and specifications for your specific tubular battery model to ensure safe and optimal charging.
What are the Typical Charging Time and Voltage for a 220Ah Tubular Inverter Battery?
The typical charging time and voltage for a 12V 220Ah tubular battery can vary depending on several factors, including the charging method, the state of discharge, and the specific battery model. However, here are some general guidelines.
Charging Time: The charging time for a 220Ah tubular inverter battery range between several hours to several days, depending on the charging current and the depth of discharge. As a rough estimate, a common charging time for such batteries can be around 8 to 12 hours at the recommended charging current.
Charging Voltage: The charging voltage for a 220Ah tubular inverter battery is typically higher than its nominal voltage. It is commonly known as the “float voltage” or “absorption voltage.” For most tubular inverter batteries, the charging voltage can range from around 13.8 to 14.4 volts per battery cell. Therefore, for a 2.4 to 2.5 volt battery composed of 6 cells, the charging voltage would be approximately 14.4 to 14.6 volts.
It’s important to note that these values are general estimates, and the actual charging time and voltage will depend on the specific battery model, manufacturer recommendations, and the charging system used. It’s always best to consult the battery manufacturer’s documentation or user manual for precise information regarding charging parameters for your specific battery.
What is the Recommended Charging Current for a 220Ah Tubular Inverter Battery?
The recommended charging current for a 220Ah tubular inverter battery can vary depending on the manufacturer and specific model. However, as a general guideline, the recommended charging current for such batteries is often around 10% to 20% of the battery’s capacity.
For a 220Ah tubular inverter battery, the recommended charging current would typically be approximately 22 amps. It’s important to note that this is a general range, and the specific charging current may vary depending on the manufacturer’s specifications and guidelines.
To determine the precise recommended charging current for your specific battery, it is always best to consult the battery manufacturer’s documentation or user manual. Following the manufacturer’s guidelines will help ensure safe and efficient charging of the battery.
Which is the Best Tubular Inverter Battery in Nigeria?
The power and climatic conditions of Nigeria require that a tubular inverter battery is robust and powerful. The Star Plus 12V 220Ah tubular inverter battery is made with precision and cares, keeping in mind the specific requirements of the Nigerian people. So, be it for household use or for commercial usage, these batteries are the perfect addition to meet your power requirements. The Star Plus 220Ah tubular battery dimension is such that it can be installed easily in your home or commercial places.